RYAN HOMES AT PARK VIEW PRESERVE PHASE 2

Scope of Work: 

The Park View Preserve Phase 2 project included the following activities:​​​​​

• Demolition and Erosion Control:

  • Removed existing asphalt and curbs.

  • Installed erosion control measures and inlet protection to safeguard the site during construction.

• Land Clearing and Preparation:

  • Cleared and grubbed over 3 acres to prepare the site for development.

• Sanitary Sewer Installation:

  • Over 2,800 linear feet of 8-inch SDR35 PVC gravity sewer were installed.

  • Installed 15 manholes and 74 sanitary service lines.

  • Tied the new system into an existing sanitary service manhole.

• Stormwater Management:

  • Installed over:

    • 850 linear feet of 15-inch RCP.

    • 700 linear feet of 18-inch RCP.

    • 850 linear feet of 24-inch RCP.

    • 200 linear feet of 30-inch RCP.

  • Installed 27 storm structure inlets and tied into four existing storm structures.

• Water System Installation:

  • Tied into an existing 8-inch water main.

  • Installed:

    • Over 2,600 linear feet of 8-inch C900 DR18 PVC water main.

    • Over 500 linear feet of 4-inch C900 DR18 PVC water main.

    • 6 fire hydrants and 70 water service lines.

• Roadway and Sidewalk Construction:

  • Over 8,100 square yards of asphalt, base, and stabilization were installed.

  • Installed over 5,800 linear feet of F curb.

  • Constructed 550 square yards of sidewalk, including 6 ADA ramps with detectable warning pads.

• Conduit Installation:

  • Over 11,800 linear feet of 2-inch Schedule 40 conduits were installed to support future utility needs.